We're sorry that you faced this issue.
Leakage can be caused by different reasons, please read the article below to identify and fix the problem.
- Water tank leakage
The main reason for water tank leakage is a blur on the bottom of the water tank from the inner side. In general, it could be fixed pretty easy - the gasket that closes the valve should be pushed into place. In the video attached we show how to do it - you can take the water tank cover and push the valve a little bit. It is important not to push too hard - better to do it lightly several times. Push until the water stops dripping and it should not drip again.
- Major leakage occurs several minutes after installing the water tank
The main reason of this defect is that the valve under the water tank is not positioned vertically. We have demonstrated it in the video. The main reason is that due to minor technological defect the valve is welded to the bathtub body. So what we demonstrate on the video is that in order to fix this defect we need to separate the valve from the bathtub body. Sometimes it will require a bit of force. The second part of the video shows how to disassemble the device and take off the backlight cover to reach the valve.
There can be another problem - please check rubber ring on valve and magnet's position. Rubber ring has to fit tight to the valve. Magnet has to be slightly pushed into water tank until it doesn’t move.
- Overflowing of the bathtub
The only reason why that might have happened is a problem with the float. At the bottom you can see a white plastic body inside. After some time of inactivity, the valve at the bottom under the float can be clogged. To fix it you need to clean it with a small brush or blow it out. That should help.
If nothing of the above helps
There are two possible reasons:
- Overflowing of bathtub doesn't stop. It seems that float in your device is broken. Unfortunately, you won't be able to fix it. Please contact our support team by submitting a request via the button above, describing the issue in details and providing additional info, such as a photo or, preferrably, a video of the issue.
- Cracked housing, water tank or system of water supply. You need to contact our support team, again, describing the issue in details and providing additional info, such as a photo or, preferrably, a video of the issue.